Menu
Your Cart

10% to 60% Off All Skate Gear
Don't Miss Out!

10% to 60% off the entire skate shop *coupon code is 'skate'

Iron on Embroidered Patch Flames

Iron on Embroidered Patch Flames
Out Of Stock
Iron on Embroidered Patch Flames
฿49
Ex Tax: ฿46
  • Stock: Out Of Stock
  • Weight: 0.02kg
  • SKU: patch-fl
  • UPC: UPC1413

Iron on Patch Flames

This embroidered patch can be ironed or sewn onto clothes, bags, shoes etc.

Before you get started, make sure your fabric is suitable. Iron-on patches work best with materials like cotton and polyester but can seriously damage fabrics like nylon, rayon, or rain jacket material.


How to apply

  • To properly affix a patch, be sure to turn up your iron to the highest heat setting. 

  • Clean the part of clothing that is going to have the patch ironed on. 

  • Put the patch in the right position. If you need the patch centered, use a measuring tape. for sleeves etc. pin on the patch and check in the mirror it is in the position you desire.

  • Put the side with heat seal backing directly on the clothing.

  • To protect your garment and the patch, you can put a slightly wet light-colored thin cotton cloth over them. A hankercheif or pillowcase is ideal.

  • Press firmly on the iron and hold in place for approximately 30 seconds. Try not to move the iron around as you may move the patch.

  • After the patch cools,check if it is fixed firmly, if not, repeat the steps above.

  • Once the patch is affixed to the garment, turn it inside out and repeat the steps above, using the cover cloth again.

  • Let the patch completely cool before wearing.


Note:

Adjust the ironing temperature and time according to the thickness of the patch.


The patch will be more secure if you also apply a few stitches.


If you don't have iron, you can also sew it on.

Write a review

Note: HTML is not translated!
Bad Good
Captcha